CCTV and Security System Expert (CSE)

CCTV and security systems are crucial in maintaining safety and security in both residential and commercial settings. The importance of having a robust security system in place cannot be overstated, which is why there is a growing demand for professionals with expertise in CCTV and security systems. This is where CCTV and Security System Expert (CSE) training offered by IIPD Global comes in.

The CSE training program is designed to provide learners with the knowledge and skills required to install, configure, and maintain CCTV and security systems effectively. The course covers various topics, including access control, fire alarm systems, and video analytics. The program is suitable for individuals who are new to the field and those who wish to enhance their existing skills and knowledge.

Upon completing the CSE training program, learners will receive a certification to help them stand out in the job market. With the growing demand for security systems, there are plenty of job opportunities for individuals with expertise in this area. Some career paths that learners can pursue include security system installer, security system designer, and security system technician.

Objective:

This practical course is designed to give participants practical knowledge of the operation and installation of CCTV, Biometrics Access Control Systems, and Fire Alarm Panels at a foundation level. Practical exercises, demonstrations, and course materials back up each training program module. These training methods give the participant a greater grasp of the practical aspects of the industry and provide them with the “Hands-On” experience and confidence essential for success.

Pre-Requisite:

• Basic Understanding of systems related to the training.

Course Outline

Below is the course content, which includes a detailed outline of topics and materials covered in the course.

CCTV

Course Outcome:

Upon completing the CCTV training course from IIPD, the candidate should be able to perform the following functions at the site

1. Understand the fundamental elements that make up a CCTV System.
2. Set up a Camera.
3. Set up a Monitor.
4. Set up Network devices.
5. Set up Encoder and Decoders
6. Set up recording devices (NVR & DVR, VMS)
7. Set up & Selection of Storage
8. Connect and test system elements.
9. Setup For Wireless communication
10. Setup For Video Management Software
11. Perform Troubleshooting and maintenance.
12. Perform Testing and Commissioning
13. Understanding BNC & RJ45 Terminations

Course Content:

1. Introduction to CCTV system
2. Selection of camera
3. Cabling and termination
4. Different types of cameras
5. Night vision systems.
6. DVR configuration
7. DVR networking
8. Introduction to IP CAM
9. NVR configuration
10. IP cameras and networking
11. Remote monitoring through phone and internet

Networking

1. IP Classes
2. Concept of a switch, Router, and Modem
3. The connection between two computers
4. LAN and WAN operations
5. Internetworking basics
6. Making and Troubleshooting RJ45 Cables
7. Basics of Media Converters (Eth to Fibre)

Biometrics Access Control

Course Outcome:

Upon completing the Access Control training course from IIPD, the candidate should be able to perform the following functions at the site

1. Understand the fundamental elements that make up an Access Control System.
2. Fit the principal components of a stand-alone system and networked systems.
3. Connect and program a card, keypad, and biometrics stand-alone system.
4. Effectively connect, test, and fault-find system elements.
5. Be aware of the issues associated with Access Control Systems.
6. Have an awareness of the changing technology and its impact on the industry.

Course Content:

1. Introduction to access control system
2. The conventional and credential system
3. Installation and configuration
4. Types of credential systems
5. Biometric access control system
6. Access control panel and types
7. Report preparation
8. Locking system- fail safe and fail secure.
9. RFID, proximity cards

Fire Alarm Panel

Course Outcome:

Upon completing the Fire Alarm Panel training course from IIPD, the candidate should be able to perform the following functions at the site.

1. Select, prepare, and connect the cable to the associated equipment.
2. Be aware of different detection and signaling devices and their uses.
3. Wire Standard and Addressable fire control Panels to appropriate detection and signaling devices.
4. Have a fundamental knowledge of how to design a system.
5. Have a fundamental knowledge of the requirements to commission a system.
6. Troubleshoot and test a system.

Course Content: �

1. Introduction to fire alarm and control system
2. Conventional fire alarm panels
3. Addressable fire alarm panels
4. Types of detectors-Heat, smoke, PIR
5. Zone and loop concept
6. Detector addressing
7. Fire alarm cable types
8. Fire panel communication system
9. Fire system design and symbols used.
10. Semi Addressable Fire Alarm Practical

Certification:

On completion of the Course, the participant will receive a Government of Dubai KHDA attested training certificate.

Methodology:

Batch and One on One Classes